GENERAL   EQUIPMENT   INC.                    

This is our water bungalow, the house is light steel structure,then decorated with the finishing material.

Looks nice and would be high quality. The light steel structure can suffer from 8 degree earthquake and 60m/s wind, the strength of a typhoon . The light steel structure are all galvanized, which is resistant to sea corrosion,the structure have a long lifetime of 50 years.

Includes the bathroom / shower and toilet but do not include the kitchen
 

Packaging & Delivery

Specifications

 Wooden home

1.earthquake, hurricane,fire proof;
2.steel frame for structure;
3.energy saveing;
4.green.

Why Choose Light Gauge Steel Structure?

1) Lifetime for structure: 100 years.

2) Earthquake resistance: mix more than 8 grades.

3) Wind resistance:max 60m/s.

4) Fire resistance:all the materials used can be fire resistance.

5) Snow resistance:max 2.9KN/m²as required

6) Heat insulation:100 mm in thickness can match 1 m thickness of brick wall.

7) High acoustic insulation:60db of exterior wall 40db of interior wall

8) Insect prevention: Free from the damages by insects, such as white ants

9) Ventilation:a combination of natural ventilation or air supply keep the indoor air fresh and clean

10) Packing and delivery: 140SQM/ 40'HQ container for structure only and 90SQM/ 40'HQ container for structure with decorate materials.

11) Installation:the average is one worker one day install one SQM.

12) Installation guide:dispatch engineer to guide on site.

 Design code:

(1)AISI S100 North American Specification for the Design of Cold Formed Steel Structural Members published by the American Iron and Steel Institute (AISI) in the United States.

(2)AS/NZS 4600 Australian/New Zealand Standard-Cold-formed steel structures jointly published by Standards Australia and Standards New Zealand.

(3)BS 5950-5 Structural use of steelwork in building-Part 5. Code of practice for design of cold formed thin gauge sections published by BSI in the UK.

(4)ENV1993-1-3 means Eurocode 3: Design of steel structures; Part 1.3: General rules, Supplementary rules for cold-formed thin gauge members.